Description:

It has good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and has satisfactory thermal strength and high plasticity below 700 ℃. Particularly outstanding performance is its ability to resist dry chlorine and hydrogen chloride corrosion, and the application temperature can reach 650°C. At high temperatures, the annealed and solution-treated alloys have good oxidation resistance and high strength in the air.

The alloy can also resist ammonia gas, nitriding, and carburizing atmosphere, but the alloy will be corroded by partial oxidation media when the redox conditions alternately change.

 

Application field：

lStructural parts of aeroengine

lProduction and use of corrosive alkali metals, especially the environment where sulfides are used

lnuclear reactor

lPetrochemical

 

 

 

Physical properties

Density: 8.50g/cm3

Specific surface area: 0.243cm2/g

Sphericity≥98.5%

Bulk density: 4.12g/cm3

Hall flow rate: 17.5s/50g

Melting point: 1350-1500℃

Relative density: close to 100%

Recommended layer thickness: 15μm, 20μm, 30μm, 40μm, 50μm

 

Technical standard: Inconel™600 powder technical specification for 3D printing

Note: If the alloy powder has moisture absorption, or the storage period exceeds 3 months, it should be used before

Carry out drying treatment (150℃, heat preservation for 2 hours)