Description:

Corrosion resistant alloys with many excellent properties have good resistance to oxidizing and moderately reducing corrosion. It is one of the only materials that can withstand the corrosion of overtime chlorine, hypochlorite and chlorine dioxide solution

It has excellent stress corrosion cracking ability and good local corrosion resistance. It has satisfactory corrosion resistance characteristics in many chemical process media, including strong corrosion of inorganic acid solutions, chlorine and various chloride-containing media, and dry chlorine , Formic acid and sulfonic acid, sea water and salt water, etc.

 

Application field：

Nuclear energy industry, chemical treatment, pollution prevention

l Evaporator in chemical and petroleum industry

l Reactor for acetic acid and acid products

l Heat exchanger, reactor

l Equipment and components operating in an acid gas environment

l Sulfuric acid condenser

 

 

Physical properties

Density: 8.90g/cm3

Specific surface area: 0.253cm2/g

Sphericity≥98.5%

Bulk density: 4.55g/cm3

Hall flow rate: 16.7/50g

Melting point: 1325-1380°C

Relative density: close to 100%

Recommended layer thickness: 15μm, 20μm, 30μm, 40μm, 50μm

 

Technical standard: "Technical Specification for Hastelloy C-276 Powder for 3D Printing"

Note: If the alloy powder has moisture absorption, or the storage period exceeds 3 months, it should be used before

Carry out drying treatment (150℃, heat preservation for 2 hours)