Stellite™6 powder is a cobalt-chromium-tungsten alloy powder, a face-centered cubic solid solution alloy, which is the most widely used in the Stellite alloy series. The content of carbon and tungsten is moderate, and the toughness is good. It has good corrosion resistance, high temperature resistance, impact resistance and adhesive wear resistance in a fairly wide range below 800°C.

 

Application field：

lEngine valve

lHigh temperature and high pressure steam

lTurbine generator

lIt is used for the repair and pre-protection of valves, valve seats, blades, oil press propellers and other parts.

 

 

Note: If the alloy powder has moisture absorption, or the storage period exceeds 3 months, it should be used before

Carry out drying treatment (150℃, heat preservation for 2 hours)